主要特點：

1. 該機主要適用于16號及以上水鉆（頂平面已加工）的磨削和拋光工作。

2．采用全國首創的氣缸驅動的斜面、直面快速轉換機構，斜面完成后直接加工頂平面，無需再通過吸塑機，大圓磨去加工平面，大大節約了成本。

3. 磨拋一體直線式設計，左邊設有磨盤，右邊設有拋盤，左邊磨完成后自動移動至拋盤進行拋光，無需人工搬運夾具。

4.磨拋盤固定旋轉不升降，夾具升降采用高精度滾珠絲桿由步進電機帶動，磨拋精度可精確到0.01mm，而且每個面可單獨設定磨拋深度和時間，成品大小精確，并且因采用平面磨拋盤，與鉆接觸面大，成品鉆型好。

5. 控制系統采用先進的電腦PLC加液晶觸摸屏，系統穩定可靠，參數設置調節方便。觸摸屏全部顯示中文，嵌套式菜單，易學易用，普通工人培訓一天即可上崗。

6．系統具有拋盤磨損自動補償功能，補償周期和補償值可任意設定，機器調好后操作工人僅需按啟動按鈕，無需再對參數進行調整。

7．機器機械結構及工作原理簡單，因此穩定可靠，并且維護保養特別方便。

8．專門設計的故障排除功能，可從觸摸屏上迅速判斷輸入輸出信號是否正常，比如感應開關是否正常，按鈕是否損壞等。

9．每班可產16號（3.8mm）成品水鉆13萬顆以上。

Main features：

1．This machine is suitable for grind & polish rhinestone (the plane is processed) which it is bigger than SS16(3.8mm)。

2. It adopt incline-plane quick switch system drive by air cylinder, it is up to date all over the world. After process the incline, it process the plane immediate, it needn’t use the suction machine and Plane Grind & Polish machine to process the plane, so it save a lot of cost.

3. Grind disk and polish disk are designed in a line, left is grind disk, right is polish disk, the mould go to polish automatically after grind, needn’t replace the mould by hand.

4. The mould up-down system adopt high quality ball bearing pole, drive by the step motor, the grind and polish precision is 0.01mm, also all side can set the parameter deepness and time alone, so the final product is exactitude.

5. Control system adopt advanced PLC and touch screen, the system stability and reliability is high, the parameter set and adjust is convenience.

6. The system have polish disk abrasion expiation function, after machine adjust finished, the worker have nothing to but take the mould.

7. The machine structure and work principle are very good but very simple, so it is stably and easy to maintain.

8. Special designed trouble remove function, it can check if the input and output signal right or not from the touch screen conveniently. Such as judge the switch is right or not , the button is right or not, so remove the trouble quickly.

9. It can produce 130,000 SS16(3.8mm) rhinestone in ten hours.

主要參數 Main Parameter：     

1.主電機功率      Main Motor               5.5KW

2.磨拋盤直徑      Grind Disk Diameter      φ500

3.夾具有效針距     Mould Pin Distance       400mm

4.外形尺寸         Dimension                L1600×L1200×1500

5.一組占地面積     One Set Dimension        L3000×W2700

6.重量             Weight                   0.75T

還沒有人留言！