飛剪螺旋風管機1602A

飛剪螺旋風管機

產品描述

The module technique gives the customer the possibility to choose between a number of options, allowing him to create a machine a number of options, allowing him to create a machine for his specific needs.

The frequency controlled main drive ensures a smooth acceleration and an almost noiseless operation.

    The outstanding patented flying slitter cuts the tubes to length without noise or hot sparks as known from the saws and provides smooth tube ends without deburring.

The design and options fulfill the needs in HVAC to produce in mild steel, galvanized steel, stainless steel or aluminum

    The corrugation unit allows a reduction in material costs and makes the bigger diameter tubes more rigid.

技術參數:

直徑范圍	80 – 1600mm
厚度范圍	鍍鋅板  0.4 -1.3mm
	不銹鋼  0.8mm
	鋁  板  0.4-1.2mm
帶料寬度	厚度達1mm, 標準寬度為137mm, 在要求范圍內可以達140mm
咬口	外圓管,可按要求在內部咬口
工作速度	最大切割速度60米/分,視材料而定
切割方式	飛速切割
凈重	2900kg
毛重	3200kg
設備尺寸	3000mm*1950mm*1700mm,
包裝尺寸	3050mm*2000mm*1800mm
操作性能	具有自動控制長度的系統＆鋸斷切割裝置

上一條：滾剪螺旋風管機1602B 下一條：已到底部