Bergquist GapPad2500S20超低壓力應用間隙填充導熱材料

材料生產商：美國貝格斯（BERGQUIST）公司研發產品

GapPad2500S20可供規格：

厚度(Thickness)：0.25mm 0.51mm 1.02mm 1.52mm 2.03mm 2.54mm 3.18mm4.06mm 5.08mm 6.35mm

片材(Sheet)：8”×16”（203×406 mm）8.4”×19”(213.36×482.6mm)

卷材(Roll)：無

  導熱系數(Thermal Conductivity)：2.4W/m-k

  基材(Reinfrcement Carrier)：玻璃纖維

膠面(Glue)：雙面自帶粘性

顏色(Color)：淺黃色

包裝(Pack)：美國原裝進口包裝

抗擊穿電壓(Dielectic Breakdown Voltage)（Vac）:＞3000

持續使用溫度（Continous Use Temp）：-60°~200°

 GapPad2500S20特點和好處

Gap Pad 2500S20 is a thermally conductive, reinforced material rated at a thermal conductivity of 2.4 W/m-K.The material is a
filled-polymer material yielding extremely soft, elastic characteristics.The material is reinforced to provide easy handling, converting, added electrical isolation and tear resistance. Gap Pad 2500S20 is well suited for lowpressure applications that typically use fixed standoff or clip mounting.The material maintains a conformable, yet elastic nature that allows for excellent interfacing and wet-out characteristics, even to surfaces with high roughness and/or topography.
Gap Pad 2500S20 is offered with inherent natural tack on both sides of the material allowing for stick-in-place characteristics during application assembly. It is also available with a non-tack side. Please see the “Standard Options” section for description. The material is supplied with protective liners on both sides.The top side has reduced tack for ease of handling.

GapPad2500S20技術優勢分析：

GapPad2500S20是額定熱傳導率為2.4W/mK增強的導熱材料。這種材料由超柔軟的填充聚合物構成，增強了易加工性，轉換性，電氣絕緣性和抗撕裂性。這種材料被典型的用做螺絲固定或者夾子固定的低緊固壓力的應用，它的彈性特性和貼服性能決定了其優良的界面潤濕特性，從而保持高度粗糙的或者平整界面一致。GapPad2500S20在裝配的過程中兩邊用螺絲釘自然固定，從而固定其位置。材料的兩邊都有保護襯墊保護。

GapPad2500S20典型應用

處理器和散熱器之間、圖形芯片和散熱器之間、硬盤，DVD，CDROM電子冷卻、需要傳熱的框架，底盤或者其它需要熱轉移的區域。